5 Common Ruger Security Six Problems You Must Be Aware Of

5 Common Ruger Security Six Problems You Must Be Aware Of

Written by pvadeal90, In General, Published On
May 22, 2024

Are you a proud owner of a Ruger Security Six revolver? While this iconic firearm boasts durability and reliability, like any other tool, it can encounter some common issues. Whether you’re new to shooting or a seasoned gun enthusiast, being aware of potential problems and their solutions is crucial for maintaining your Ruger in top condition.

In this article, we’ll delve into the 5 most prevalent Ruger Security Six Problems that owners may face and provide practical tips to address them effectively. Let’s ensure your trusty revolver remains in prime shape for years to come!

Common Problems Faced by Ruger Security Owners

Are you a proud owner of a Ruger Security Six revolver? While this classic firearm is known for its durability and reliability, like any mechanical device, it may encounter some common issues over time.

1: Cylinder Locking Up & Its Solution

Have you ever experienced your Ruger Security Six cylinder locking up unexpectedly while shooting? It can be frustrating and impact your shooting experience. One of the common reasons for this issue could be a buildup of dirt, debris, or fouling inside the cylinder assembly.

To address this problem, start by thoroughly cleaning the cylinder and its components with a solvent to remove any accumulated residue. Pay close attention to areas where fouling tends to accumulate, like around the ejector rod and chambers. After cleaning, lubricate the moving parts with a light gun oil to ensure smooth operation.

Regular maintenance is key in preventing cylinder lockup issues. Make it a habit to clean and inspect your revolver after each use. By keeping your Ruger Security Six well-maintained and free from debris, you can minimize the chances of encountering cylinder locking problems on your next range session.

2: Misaligned Barrel or Cylinder & Its Solution

One of the common issues that Ruger Security Six owners may encounter is a misaligned barrel or cylinder. This can lead to accuracy problems and potential safety concerns. If you notice that your shots are consistently off target or if there is visible misalignment, it’s crucial to address this issue promptly.

To solve this problem, first, ensure that the revolver is unloaded and safe to work on. Then, carefully inspect the alignment of the barrel and cylinder to identify any discrepancies. In some cases, simple adjustments can be made by a qualified gunsmith to realign the components properly.

It’s important not to ignore this issue as it can affect the overall performance of your firearm. Regular maintenance and inspection can help prevent misalignments from occurring in the first place. Remember, safety should always be a top priority when dealing with any firearm-related concerns.

3: Failure to Eject Spent Casings & Its Solution

One common issue that Ruger Security Six owners may encounter is the failure to eject spent casings. When this happens, it can be frustrating and impact the gun’s performance. The inability to properly clear out spent casings can lead to malfunctions and disrupt your shooting experience.

To address this problem, first, ensure that you are using high-quality ammunition suitable for your firearm. Low-quality or improper ammo can contribute to ejection failures. Next, inspect the extractor and ejector mechanisms for any debris or damage that could be causing issues with ejection.

Regularly clean and lubricate these components to maintain smooth operation. Additionally, check the chamber for any obstructions that may impede the ejection process. By taking these steps, you can help prevent failures in ejecting spent casings and keep your Ruger Security Six functioning reliably during shooting sessions.

4: Difficulty with Trigger Pull & Its Solution

If you’re a Ruger Security Six owner, dealing with difficulty when pulling the trigger can be frustrating. This issue may stem from various factors, such as dirt or debris accumulation within the trigger mechanism.

To address this problem, start by ensuring your firearm is unloaded and safe to handle before proceeding. Next, carefully disassemble the revolver according to the manufacturer’s instructions. Once inside, inspect for any obstructions or signs of wear that could be impeding smooth trigger function.

Cleaning and lubricating all components thoroughly can often resolve trigger pull issues. Be cautious not to over-lubricate, as this can attract more dirt over time. Reassemble your Ruger Security Six meticulously and test the trigger pull again to see if the problem persists.

Remember, maintaining your revolver regularly will not only enhance its performance but also prolong its lifespan for many shooting sessions ahead!

5: Corrosion and Rusting & Its Solution

The Ruger Security Six, a durable and reliable firearm, can still fall victim to corrosion and rusting if not properly maintained. Exposure to moisture or neglecting regular cleaning can lead to these issues affecting both the appearance and functionality of your revolver.

To prevent corrosion from taking hold, it’s crucial to clean your Ruger Security Six thoroughly after each use. Use a good quality gun cleaner and lubricant specifically designed for firearms. Pay close attention to areas prone to trapping moisture, like around the barrel and cylinder.

Regularly inspect your revolver for any signs of rust or corrosion. If you notice any discoloration or rough spots, take immediate action to address the issue before it worsens. Light surface rust can often be removed with a gentle abrasive pad and some gun oil.

Invest in a proper storage solution such as a gun safe or dehumidifier to protect your Ruger Security Six when not in use. These measures will help maintain its condition over time and ensure it continues performing at its best whenever you need it most.

Remember, prevention is key when dealing with corrosion and rusting on your firearm. Stay proactive in caring for your Ruger Security Six so you can enjoy using it for years to come without worrying about the damaging effects of neglectful maintenance practices.


Being aware of the common problems faced by Ruger Security Six owners is crucial in maintaining the longevity and performance of your firearm. By understanding these issues and their solutions, you can ensure that your revolver functions smoothly and reliably.

Whether it’s addressing cylinder locking up, misaligned barrel or cylinder, failure to eject spent casings, difficulty with trigger pull, or combating corrosion and rusting, being proactive in resolving these issues will enhance the overall shooting experience with your Ruger Security Six.

Remember to regularly inspect and maintain your revolver to prevent potential problems from escalating. If any persistent issues arise despite troubleshooting attempts, don’t hesitate to seek professional assistance from a gunsmith or contact Ruger customer support for further guidance.

By staying informed and taking proper care of your Ruger Security Six, you can continue enjoying its performance for years to come.


1. Can I use +P ammunition in my Ruger Security Six?

Yes, the Ruger Security Six can handle limited use of +P ammunition, but it’s recommended to consult with a gunsmith for optimal performance and longevity.

2. How often should I clean my Ruger Security Six?

Regular maintenance is key to keeping your firearm in top condition. It’s advised to clean your Ruger Security Six after each use or at least every few months if not in regular use.

3. Are there aftermarket parts available for the Ruger Security Six?

Yes, there are various aftermarket parts and accessories available for the Ruger Security Six that can enhance its performance or aesthetics.

4. Can I dry-fire my Ruger Security Six without damaging it?

Dry firing occasionally is generally safe for the Ruger Security Six; however, using snap caps as a precaution is always recommended to prevent unnecessary wear on the firing pin.

5. What is the best holster for carrying a Ruger Security Six?

The best holster choice depends on personal preference and how you plan to carry your firearm—whether concealed inside-the-waistband (IWB) or outside-the-waistband (OWB). Researching reputable brands and trying different options can help find the most comfortable fit for you.

Also Read -   What Are the Things to Consider While Relocating to a New City?
Related articles
Join the discussion!